Installing a new set of car audio speakers should be a simple upgrade for any car audio system. In most instances, it will be simple job of matching the dimension, power and resistance (OHMS) of your Original Equipment Manufacturer (OEM) speakers. Just don’t fall into the trap of just improving the dimensions of your speakers and expecting excellent and louder sound. This is a widespread error, which simply isn’t the best way to go.
Power Output – Watts
The initial point to think about is the suggested power prerequisites of the speakers. This is the best way to evaluate car audio speakers, which is to evaluate the constant power or RMS of the speakers. You have to verify your car’s sound system to figure out if there is an amplifier or is it just the supply unit powering your speakers. Most OEM premium sound systems have an amplifier integrated in their setup. You might want to seek advice from your car dealer or a nearby custom shop to verify this. You also need to get a powerful subwoofer to output the bass.
Most entry-level speakers from superior manufacturers will execute flawlessly just being driven by the supply unit. But if you are going to invest in the best car audio speakers, you should really think about installing a power amplifier. No matter which way you make your mind up to go with, you will come across that just about any upgraded car audio speaker will always perform better than OEM installed speakers.
The next point to consider is getting the right dimensions for the speakers for your vehicle. A very popular model to get, are the 6×9 car speakers. These usually come in either two-way or three-way models and can produce varying sounds at low and high frequency. There is only one way to ensure you buy the right size, and that is to remove the door panel and measure the mounting diameter and the mounting depth of the existing speakers. This isn’t too complicated to do, and given that you will probably want to install your new speakers on your own, the door panel will have to be eliminated anyway.
Be sure to lower your window within the door, and measure the offered depth. In many occasions you will come across newer replacement speakers that will demand a bit more depth than your original car speakers. But nowadays, lots of companies are generating shallow mount speakers for even the most complicated installations.
Many car and truck owners opt to move their new speakers from the usual door areas. Doing this also widens your decision of brand and size of speakers. There are several excellent kick panel replacements, which allow the car owner to install his new speakers in the kick panel area. This betters the “sound stage” significantly, thus improving the sound quality that you and your passengers will enjoy.
Installing new car audio speakers is not the most challenging job when upgrading a car audio system. Even installing a fancy touch screen car stereo is easy. Most persons who can follow common ‘step by step’ instructions and have a bit of patience will have an easy time installing their new speakers. There are speaker set up videos on the web that will give you illustrate on how to proceed for your particular brand.
Through experience I’ve discovered that upgrading your car speakers will get you the best benefit per dollar invested. New speakers can make a big difference on how you enjoy your favorite music. But don’t forget one basic truth: you get what you pay for. Do not expect a $60 set of coaxial speakers to sound as good as a $500 component speaker set. Buying online is the only way to go. You can literally save hundreds of bucks over going to a nearby custom sound shop. So go for it and upgrade your car or truck’s speakers and you won’t be sorry.